LL1 Signature forforstærker
Udskriftsvenlig side

LL1 - forforstærker - dual mono i 4 kabinetter

En forforstærker der matcher ML3, ligeledes opbygget i 4 separate kabineter.
Hver kanal for sig, og hver separat strømforsyning i egne kabinetter, det er hardcore dual mono ført het ud.

The monaural line level preamplifier model LL1 Signature is the ultimate statement of perfection in High-End audio.  Just like ML3 Signature is the best creation of its designer's professional career among the LAMM amplifiers, so is the LL1 Signature among the line level LAMM  preamplifiers. 

The LL1 Signature has been designed to complement the ML3 Signature amplifier, and this combination in a system represents a "match made in heaven".  However, the LL1 Signature will perform magic with any other appropriate power amplifier.

The LL1 Signature features a topology that brings out the most natural sound performance in the audio path. In principle, it is a single-stage unit that basically represents the shortest possible signal path.

The preamplifier contains four very linear low impedance triodes paralleled into a single inverting gain stage.

The LL1 Signature employs a pure single-ended class A operation, with no overall feedback applied. Also featured are specially selected high-transconductance dual triodes 6N30P-DR/ 6Н30П-ДР (original) in the signal path and TKD stepped potentiometers for volume control - the best available on today's market.

The preamplifier's audibly neutral power supply features a full-wave vacuum rectifier.  This rectifier, together with a choke-containing filter, allows to practically get rid of the hum and buzz and, in the end, to ensure the verity of dynamic range without coloration.  Two solid-state analog voltage regulators supply dc voltage to the tube filaments (heaters).

Other features include 3 inputs, one tape/HT processor loop, attenuator (-12 dB) switch, output 1/output 2 switches, protection circuitry designed to enable manual muting of the output signal, and built-in remote on/off for LAMM power amplifiers.

The main distinction of the LL1 Signature from any other comparable type of preamplifiers is its practically inaudible sonic signature.  When connected to an appropriate type of power amplifiers, especially LAMM power amplifiers, it assures the extraordinary transparency of perceived sound and recreation of a three-dimensional soundstage in the home, recording studio, etc., without boundaries and limitations.

Each preamplifier is handcrafted of the finest materials and top quality parts like military-grade DALE metal-film resistors, PRC wire-wound resistors, BOURNS multi-turn potentiometers, CORNELL DUBILIER and UNITED CHEMI-CON electrolytic capacitors, ELECTROCUBE, ELCON and ROEDERSTEIN film capacitors; HAMMOND chokes, gold-plated NEUTRIC connectors, and military-grade low-noise long-life vacuum tubes.

A custom-designed massive damping panel installed in the preamplifier unit significantly reduces all types of mechanical vibrations which, in turn, leads to a more extended, coherent and natural bass reproduction.

The LL1 Signature features a custom-designed super-low noise power transformer.

The LL1 Signature works on all world AC line voltages (100/120/220/230/240V).

 


Download prisliste
Opdateret: 29. august 2011 kl. 20:11
URL: www.highend-sound.com/produkter/lamm---roer-og-hybrid-elektronik/ll1-signature-forforstaerker.aspx
Forside Produkter Nyheder Artikler Kontakt Sitemap

Copyright © 2003 - High End Sound - Alle rettigheder forbeholdes.
En hver reproduktion, brug af tekster, billeder og/eller anden grafik kræver skriftlig tilladelse.
RSS feed 2.0

CMS: Umbraco (.NET)
Concept & Design: ZoneDesign.dk